BE117448 - SL2100 KSU And CPU Package
This package contains the NEC SL2100 Chassis (BE116491) and the NEC SL2100 CPU Card (BE116496)
BE116491 - SL2100 Chassis
NEC SL2100 Main Chassis provides (4) slots for station cards.
BE116501 - SL2100 Exp. Card for Base Chassis
The SL2100 Exp. Card for Base Chassis is required when adding and expansion chassis or to add an additional (12) ports of InMail/VRS (no additional storage).
BE116504 - SL2100 Exp. Card for Exp Chassis
The SL2100 Exp. Card for Exp Chassis is required when adding an expansion chassis to the main SL2100 Chassis.
BE116496 - SL2100 CPU Card
The SL2100 CPU Card Provides (8) VoIP channels, (4) ports of InMail/VRS with (2) InMail storage hours, (4) Mobile Extension Clients, Telephony Resources – for DTMF, Dial Tone/Busy Tone detection, and FSK Caller ID receiver/sender, Tone Sender – for system tones and DTMF and Conference Resources.
BE116500 - SL2100 VoIP Daughter Board
SL2100 VoIP Daughter Board - VoIP channels are used for IP telephones, IP trunks, and IP networking.
BE116502 - SL2100 Small InMail SD Card 15hr
SL2100 Small InMail SD Card/15hr - Provides automated attendant and voice mail functions.
BE116503 - SL2100 Large InMail SD Card 120hr
The SL2100 Large InMail SD Card/120hr Provides automated attendant and voice mail functions. The SL2100 Large InMail replaces the built-in 2-hour storage and provides approximately 4G/120 storage hours.
BE116506 - SL2100 8-Port Digital / 2-Port Analog Combo Station Card
8-Port Digital / 2-Port Analog Combo Station Card provides interface for (8) digital stations and (2) analog stations. NEC Doorboxes can be connected to the analog station ports – up to the system maximum of (6) – (2) per 082U Card.
BE116507 - SL2100 8-Port Analog Station Card
SL2100 8-Port Analog Station Card - Provides interface for (8) analog stations (not NEC Doorboxes)
BE116509 - SL2100 CO Trunk Expansion Mounting Card
The SL2100 CO Trunk Expansion Mounting Card Allows addition of (1) 3-Port CO Trunk Daughter Board (3COIDB) or (1) PRI Daughter Board (1PRDB), when system has fewer station cards than CO Trunk/PRI Daughter Boards.
BE116510 - SL2100 3-Port CO Trunk card
The NEC SL2100 3-Port CO Trunk card Provides interface for (3) standard loop-start CO trunks. Equipped with (1) 8-conductor interface jack
BE116512 - SL2100 PRI Daughter Board
The SL2100 PRI Daughter Board provides interface for (1) PRI or T1 circuit.